Steel Epoxy Stick is the original metal-filled epoxy used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.
Monarch's Steel Epoxy Stick is reinforced epoxy stick. Dries steel hard in 15 minutes. Ready to drill, tap, file machine etc. After one hour, Permanent repairs to metal, glass, plastic, ceramic, more bonds like epoxy, harden like steel. Monarch's Steel Epoxy Stick is sets up Under water, impervious to chemicals.
- Bonds to most metals, concrete and some plastics.
- Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted.
- Excellent resistance to oil, gasoline, water and many chemicals.
- Long Pot Life Repairs.
Recommended Steel Epoxy Stick Application’s
- Metal Tube Sheet Repair
- Bearing Race Repair
- Water Box Channel Repair
- Oil Pipe Line Corrosion Repair
Steel Epoxy Stick Mixing Guide and applying Method :
Before applying, roughen and clean area to be repaired. Then follow these easy steps.
1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.
No comments:
Post a Comment