Bronze Epoxy Stick is a bronze filled epoxy compound for patching, filling, bonding and rebuilding bronze surfaces. Cured material has a bronze like finish that can be machined, drilled, tapped or filled just like the original metal.
- Won't sag or shrink
- Easy to mix and use – rebuilds worn parts fast, reduces downtime
- For repairs of bronze components without hampering the aesthetics
- Ideal choice in place of brazing
- Excellent bonding to bronze, alloys, brass, copper etc
- Can be machined, drilled, and tapped
Recommended Bronze Epoxy Stick Application’s:
- Patching non-structural defects in bronze castings
- Sealing cracked castings, tanks, vessels and valves
- Repairing holes
- Rebuilding bronze Impellers
- Renewing bolt and screw holes
- Making models and jigs for holding odd shaped parts
- Repairs and rebuilds areas where brazing would be undesirable or impossible
- Bonds securely to bronze alloys, brass, copper, and ferrous metals
Bronze Epoxy Stick Mixing Guide and Applying Method:
Before applying, roughen and clean area to be repaired. Then follow these easy steps.
1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.
Before applying, roughen and clean area to be repaired. Then follow these easy steps.
1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.
No comments:
Post a Comment