Titanium Epoxy Stick

Titanium Epoxy Stick is used to reclaim worn out machinery and process equipments. This is multi-purpose epoxy stick which is specially formulated to offer high compressive strength and resistance from chemicals. These are recommended for the most critical repair and reclamation works.

Titanium Epoxy Stick Product Feature's

• Excellent temperature resistance 177° C
• High compressive strength (15,200 psi)
• All Purpose Engineering Repairs
• Resistance to chemicals and most acids, bases, solvents, and alkalis

Recommended Titanium Epoxy Stick Application's

• Coupling Bolt Repair
• Paddle Wheel Shaft / Hub Repair
• Pump Repair
• Water Box Channel Repair
• Bearing Seat & Housing
• Shaft
• Pipe elbow
• Oil Cooler
• Heat Exchanger
• Offline leakages
• Motor end Covers and Compressors.

Titanium Epoxy Stick Mixing Guide and Applying Method
Before applying, roughen and clean area to be repaired. Then follow these easy steps.

1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.

Wood Repair Epoxy Stick

Wood Repair Epoxy Stick is ideal for repairing, replacing, or adding to wood and most rigid surfaces, as well as to dried out, rotted or spongy wood consolidated with Wood Repair Epoxy Stick

Product Feature's

• Wood Repair Epoxy Stick bonds permanently with high strength to most surfaces.
• It fills, cracks, holes, and voids of any size without the shrinking and crumbling of common wood fillers.
• It can replace or add missing or new sections in window frames and sills, furniture sculptures, structural and decorative components, indoors and outdoors. Because of its strength and durability, it is as different from wood fillers as a permanent solution from temporary remedies.

Recommended Titanium Epoxy Stick Application's

• Window sills
• Threshold
• Window, door frames and columns
• Stair steps
• Balustrades
• Wood floors
• Indoor and Outdoor furniture,
• Statues, Archaeological and Art Restoration

Wood Repair Epoxy Stick Mixing Guide and Applying Method

Before applying, roughen and clean area to be repaired. Then follow these easy steps.

1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.

Steel Epoxy Stick

Steel Epoxy Stick is the original metal-filled epoxy used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.

Monarch's Steel Epoxy Stick is reinforced epoxy stick. Dries steel hard in 15 minutes. Ready to drill, tap, file machine etc. After one hour, Permanent repairs to metal, glass, plastic, ceramic, more bonds like epoxy, harden like steel. Monarch's Steel Epoxy Stick is sets up Under water, impervious to chemicals.

Product Feature’s

• Bonds to most metals, concrete and some plastics.
• Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted.
• Excellent resistance to oil, gasoline, water and many chemicals.
• Long Pot Life Repairs.

Recommended Steel Epoxy Stick Application’s

• Metal Tube Sheet Repair
• Bearing Race Repair
• Water Box Channel Repair
• Oil Pipe Line Corrosion Repair

Steel Epoxy Stick Mixing Guide and applying Method :
Before applying, roughen and clean area to be repaired. Then follow these easy steps.


1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.

Express Titanium Epoxy Stick

Express Titanium Epoxy Stick is used to reclaim worn out machinery and process equipments. This is multi-purpose epoxy stick which is specially formulated to offer high compressive strength and resistance from chemicals. These are recommended for the most critical repair and reclamation works.

Express Titanium Epoxy Stick Product Feature's

• Excellent temperature resistance 177° C
• High compressive strength (15,200 psi)
• All Purpose Engineering Repairs
• Resistance to chemicals and most acids, bases, solvents, and alkalis

Recommended Express Titanium Epoxy Stick Application's

• Coupling Bolt Repair
• Paddle Wheel Shaft / Hub Repair
• Pump Repair
• Water Box Channel Repair
• Bearing Seat & Housing
• Shaft
• Pipe elbow
• Oil Cooler
• Heat Exchanger
• Offline leakages
• Motor end Covers and Compressors.

Express Titanium Epoxy Stick Mixing Guide and Applying Method
Before applying, roughen and clean area to be repaired. Then follow these easy steps.

1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.

Copper Epoxy Stick

Copper Epoxy Stick is a hand-kneadable, fast-setting, copper-reinforced polymer compound for permanent repairs to copper, brass, Copper and other non-ferrous metals. It also bonds to wood, glass, masonry and many plastics. It comes in a handy form with the curing agent encapsulated in the contrasting color base material.

Product Features:

• Won't sag or shrink
• Easy to mix and use – rebuilds worn parts fast, reduces downtime
• For repairs of Copper components without hampering the aesthetics
• Ideal choice in place of brazing
• Excellent bonding to Copper , alloys, brass, copper etc
• Can be machined, drilled, and tapped.

Recommended Copper Epoxy Stick Application’s

• Patching non-structural defects in Copper castings
• Sealing cracked castings, tanks, vessels and valves
• Repairing holes
• Rebuilding Copper Impellers
• Renewing bolt and screw holes
• Making models and jigs for holding odd shaped parts
• Repairs and rebuilds areas where brazing would be undesirable or impossible
• Bonds securely to Copper alloys, brass, copper, and ferrous metals.
• Repair leaks in household water lines within minutes.
• Fix freeze breaks in 15 minutes.
• Seal pipes, elbows, joints, sleeves, traps and drains.
• Join and seal copper rain gutters and downspouts.

Copper Epoxy Stick Mixing Guide and applying Method :
Before applying, roughen and clean area to be repaired. Then follow these easy steps.


1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.

Bronze Epoxy Stick

Bronze Epoxy Stick is a bronze filled epoxy compound for patching, filling, bonding and rebuilding bronze surfaces. Cured material has a bronze like finish that can be machined, drilled, tapped or filled just like the original metal.

Product Features:

• Won't sag or shrink
• Easy to mix and use – rebuilds worn parts fast, reduces downtime
• For repairs of bronze components without hampering the aesthetics
• Ideal choice in place of brazing
• Excellent bonding to bronze, alloys, brass, copper etc
• Can be machined, drilled, and tapped

Recommended Bronze Epoxy Stick Application’s:

• Patching non-structural defects in bronze castings
• Sealing cracked castings, tanks, vessels and valves
• Repairing holes
• Rebuilding bronze Impellers
• Renewing bolt and screw holes
• Making models and jigs for holding odd shaped parts
• Repairs and rebuilds areas where brazing would be undesirable or impossible
• Bonds securely to bronze alloys, brass, copper, and ferrous metals

Bronze Epoxy Stick Mixing Guide and Applying Method:
Before applying, roughen and clean area to be repaired. Then follow these easy steps.

1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.

Aluminium Epoxy Stick

Aluminium Epoxy Stick for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications. This non-sagging, two-part epoxy is easily mixed and moulded to form odd shapes if required. Heavily reinforced with aluminum powder, it cures to a non-rusting aluminum-like finish, ideal for repairing aluminum parts.

Product Features:

• Repairs air conditioning system components
• Bonds to aluminum and many other metals
• Fills porosity in aluminum castings
• Can be machined drilled or tapped using conventional metalworking tools.

Recommended Aluminium Epoxy Stick Application’s:

• Repairing aluminum castings.
• Repairing worn aluminum parts.
• Making aluminum dies.

Aluminium Epoxy Stick Mixing Guide and applying Method:
Before applying, roughen and clean area to be repaired. Then follow these easy steps.


1.Cut off Required amount.
2.Mix the two component epoxy Stick into uniform color.
3.Apply to repair surface within 2 minutes.